光电工程师社区

标题: CCL程式共享(标准非球面三阶衍射面位相曲线) [打印本页]

作者: Jobyan 时间: 2003-4-16 21:21
标题: CCL程式共享(标准非球面三阶衍射面位相曲线)

[10][这个贴子最后由Jobyan在 2003/04/16 01:31pm 第 1 次编辑]
此程式用于显示三阶衍射面的位相曲线，编译链结后在指令行KEY入 DFPL N(N为衍射面别)
cmd dfpl(int sfn)
{
  float pi = 2*acos(0);
  float r = ap[sfn];
  float ri,w = wv[1];
  float pash, pash0 = 0, de1 , de2 , de3;
  real size;
  graphwin_open(1);
  for (size = .01; size  .5; size += 0.01)
  {
/* Clear the window, draw the frame and refresh
   * the display:
*/
GCLEAR;
   pen 5;
viewport(.5-size, .5+size, .5-size, .5+size);
   frame;
   gshow;
/* Let the frame remain visible for 1/10 second: */
   time_reset;
while (time  1) ;
}
  pen 4;
  gmv .5 .96;
  lor 5;
  lsz 2;
  label Diff Sur Pash Plot--yzt;
  gmv 0 0.5;
  glt 1 0.5;
  stp outp off;
  sbr;
  spe sfn;
  de1 = b4 , de2 = c4 , de3 = d4;
  for (i = 0; i1001; i++)
{
ri = i*r/1000;
pash = fabs((2000*pi*(de1*ri**2 + de2*ri**4 + de3*ri**6)/w));
if (pash0pash) pash0 = pash;
}
  gmv 0 0.5;
  pen 3;
  for (i = 0; i1001; i++)
{
ri = i*r/1000;
pash = (2000*pi*(de1*ri**2 + de2*ri**4 + de3*ri**6)/w);
glt ri/r 0.5+pash/pash0/2;

}

stp outp on;

}

作者: yydyyd 时间: 2003-5-2 02:23
标题: CCL程式共享(标准非球面三阶衍射面位相曲线)

怎么用？

欢迎光临光电工程师社区 (http://bbs.oecr.com/)