● Real time display of Dual Wavelength Loss and ORL
● Automated dual wavelength loss and ORL measurements
● Bi-directional measurements using a single fi ber
● Built in fi ber identifi er
● Text Messaging Communications
● Computer and Printer interface
● Q VGA Graphic Display
● Display Backlighting
● Rugged, Watertight Case
● Storage for 1000 records
● Free PC application software
● Rechargeable NiMH batteries , 16 Hours / charge
指标参数
Loss Measurement Dynamic Range 0 - 45 dB in Hypertest Mode, 60 dB in Manual Mode
Loss Measurement Wavelengths 1310, 1550 nm, ?20 nm
Units of Measurement dBm, dB, 0.01 dB resolution
Measurement Rate Four updates per second
Inter-unit Communications Text, eight standard messages provided, Transmitted via Fiber-Under-Test
Hypertest Displayed Quantities Loss A-B, Loss B-A, ORL from A, ORL from B, Each value @ 1310 and 1550 nm
Laser Safety Classification. Class I safety per FDA/CDRH and IEC-825-1 regulations
Laser Output Power 0 dBm, 1 mw
Laser Output Stability ?0.1 dB for 1 hour
Laser Linewidth < 5 nm
Optical Return Loss Dynamic Range 0 - 65 dB
Optical Return Loss Accuracy ?0.5 dB @ a -55 dB reflection
Power Meter Detector InGaAs, 2 mm diameter with universal 2.5 mm ferrule adaptor
Calibrated Wavelengths Provided 850, 1300, 1310, 1490, 1550, 1625 nm
Modulation Modes Provided, (transmit and detect) CW, 270 Hz, 1000 Hz, 2000 Hz
Power Meter Accuracy ?0.18 dB under reference conditions, ?0.3 dB +20 to - 50 dBm
Power Meter Display .01 dB resolution, unit of dBm or dB
Memory Storage Locations 1000
Display 4 ?QVGA LCD Graphic Display with Electroluminescent Back light
Standard Optical Connector Interface FC/APC, (other types available or request)
Batteries Supplied Rechargeable NiMH AA cells, eight
Operating Time Approximately 16 hours following a full charge
Power Supply / Charger Provided Wall Mount, 120 VAC, 50 -60 Hz, or 220 VAC 50-60 Hz, Specify
Power Requirements 10 VA Max
Temperature Range 0 to 50 C Operating,, -20 to 60 C Storage
Dimensions (L x W x D) 8.1?x 6.4?x 3.5? 210 x 160 x 90 mm
Weight 2.8 lbs, 1.3 Kg
Accessories Provided Batteries, Power supply/charger, manual, Rs-232 Cable, PC application software
Standard Warranty Two years, Components and Workmanship, 30 Day Satisfaction Guarantee
Laser Safety Classifi cation
Class I safety per FDA/CDRH and IEC-825-1 regulation
Autotest Range
0 to - 36 dB
Display
LCD, power reading, 0.4” high digits, .01 dB resolution Power meter, laser wavelength display 0.16” high digits
Annunciators
Fiber ID, - 3, modulation mode - 4, Autotest - 2, Lo Bat, Auto Off
Storage Locations
2000
Battery/Operating Time
Rechargeable Li Polymer/Approximately fi fteen hours following a full charge
Power Supply / Charger
Universal, US, UK, Continental Europe, and Australian Plugs Included
Power Requirements
95-260 VAC, 50-60 Hz, 3 VA Max
Operating Temperature Range
-10 to 45 C
Dimensions (with rubber boot )
5.9” L x 3.9” W x 1.37” H (150mm L x 100mm W x 35mm H)
Weight
0.52 Kg
Accessories Provided
FC, ST, SC adaptors for both Power Meter and Light Source, rubber boot, battery, Power supply/Charger, manual , USB Cable, PC application software
LTS-1500 Ordering Information
LTS-1500-813
Loss Test Set with 850/1300nm Light Source
LTS-1500-3
Loss Test Set with 1310nm Light Source
LTS-1500-5
Loss Test Set with 1550nm Light Source
LTS-1500-35
Loss Test Set with 1310/1550nm Light Source
LTS-1500-345
Loss Test Set with 1310/1490/1550nm Light Source
Singlemode power meter
PM-1 500 Power Meter
PM-1500C CATV Power Meter
Singlemode Light Sources
LS-1500-3 1310nm Singlemode Light Source
LS-1500-4 1490nm Singlemode Light Source
LS-1500-5 1550nm Singlemode Light Source