光电工程师社区

标题: 多曲面反射器 [打印本页]

作者: phoenixzqy    时间: 2012-3-28 22:52
标题: 多曲面反射器
最近设计的一个多曲面反射器  展示一下 呵呵
作者: phoenixzqy    时间: 2012-3-30 21:41
没有另一个网站有人气啊
作者: leesirleesir    时间: 2012-3-30 22:30
能详细介绍一下完成的方法吗
作者: LGL090909    时间: 2012-3-31 07:51
配光曲线不够完美
作者: phoenixzqy    时间: 2012-3-31 23:18
LGL090909 发表于 2012-3-31 07:51
配光曲线不够完美

符合要求就行了。你说的完美标准是什么呢?
作者: phoenixzqy    时间: 2012-4-4 20:29
!!!!!!
作者: nkclone    时间: 2012-4-4 20:53

看一下~~
作者: eraledit    时间: 2012-4-5 17:47
看看!!
作者: phoenixzqy    时间: 2012-4-5 23:02
欢迎欢迎!
作者: zhitong    时间: 2012-9-19 09:18
经过反射器后出光角度是多少啊
作者: phoenixzqy    时间: 2012-9-21 19:36
zhitong 发表于 2012-9-19 09:18
经过反射器后出光角度是多少啊

可以根据要求调整的。
作者: phoenixzqy    时间: 2012-9-27 22:15
鳞甲反射罩

3d-6-1.JPG (97.04 KB, 下载次数: 100)

鳞甲反射器

鳞甲反射器

作者: hgs0731    时间: 2012-10-10 16:51

看看!!
作者: phoenixzqy    时间: 2012-10-15 20:02
hgs0731 发表于 2012-10-10 16:51
看看!!

呵呵 多谢了
作者: kkhadied    时间: 2012-10-29 13:48
我(ˇˍˇ) 想~知道这个是怎么画出来的
作者: phoenixzqy    时间: 2012-11-6 20:37
kkhadied 发表于 2012-10-29 13:48
我(ˇˍˇ) 想~知道这个是怎么画出来的

运行程序生成的。不是画出来的。
作者: zfw0080    时间: 2012-12-10 09:49
不错不错,这种东西在COB上用的多!
作者: phoenixzqy    时间: 2012-12-10 19:56
zfw0080 发表于 2012-12-10 09:49
不错不错,这种东西在COB上用的多!

chang jiao liu!
作者: zfw0080    时间: 2012-12-11 09:40
反光杯的应用古今有之,但我认为真正把LED发扬光大的不是反光杯。
作者: phoenixzqy    时间: 2012-12-11 20:08
zfw0080 发表于 2012-12-11 09:40
反光杯的应用古今有之,但我认为真正把LED发扬光大的不是反光杯。

呵呵 古今有之  古到什么时候?
作者: zfw0080    时间: 2012-12-12 10:06
公元前6000年!
作者: phoenixzqy    时间: 2012-12-12 22:52
zfw0080 发表于 2012-12-12 10:06
公元前6000年!

呵呵 那时候外星人在用
作者: zfw0080    时间: 2012-12-13 08:44
The first mirrors used by people were most likely pools of dark, still water, or water collected in a primitive vessel of some sort. The earliest manufactured mirrors were pieces of polished stone such as obsidian, a naturally occurring volcanic glass. Examples of obsidian mirrors found in Anatolia (modern-day Turkey) have been dated to around 6000 BC.[citation needed] Polished stone mirrors from Central and South America date from around 2000 BC onwards.[1] Mirrors of polished copper were crafted in Mesopotamia from 4000 BC,[1] and in ancient Egypt from around 3000 BC.[2] In China, bronze mirrors were manufactured from around 2000 BC,[3] some of the earliest bronze and copper examples being produced by the Qijia culture. Mirrors made of other metal mixtures (alloys) such as copper and tin speculum metal may have also been produced in China and India.[4] Mirrors of speculum metal or any precious metal were hard to produce and were only owned by the wealthy.[5]

Metal-coated glass mirrors are said to have been invented in Sidon (modern-day Lebanon) in the first century AD,[6] and glass mirrors backed with gold leaf are mentioned by the Roman author Pliny in his Natural History, written in about 77 AD.[7] The Romans also developed a technique for creating crude mirrors by coating blown glass with molten lead.[8]

Parabolic mirrors were described and studied in classical antiquity by the mathematician Diocles in his work On Burning Mirrors.[9] Ptolemy conducted a number of experiments with curved polished iron mirrors,[10] and discussed plane, convex spherical, and concave spherical mirrors in his Optics.[11] Parabolic mirrors were also described by the physicist Ibn Sahl in the 10th century,[12] and Ibn al-Haytham discussed concave and convex mirrors in both cylindrical and spherical geometries,[13] carried out a number of experiments with mirrors, and solved the problem of finding the point on a convex mirror at which a ray coming from one point is reflected to another point.[14] By the 11th century, clear glass mirrors were being produced in Moorish Spain.[15][verification needed]

In China, people began making mirrors with the use of silver-mercury amalgams as early as 500 AD.[16] Some time during the early Renaissance, European manufacturers perfected a superior method of coating glass with a tin-mercury amalgam. The exact date and location of the discovery is unknown, but in the 16th century, Venice, a city famed for its glass-making expertise, became a centre of mirror production using this new technique. Glass mirrors from this period were extremely expensive luxuries.[17] The Saint-Gobain factory, founded by royal initiative in France, was an important manufacturer, and Bohemian and German glass, often rather cheaper, was also important.

The invention of the silvered-glass mirror is credited to German chemist Justus von Liebig in 1835.[18] His process involved the deposition of a thin layer of metallic silver onto glass through the chemical reduction of silver nitrate. This silvering process was adapted for mass manufacturing and led to the greater availability of affordable mirrors. Nowadays, mirrors are often produced by the vacuum deposition of aluminium (or sometimes silver) directly onto the glass substrate.


作者: phoenixzqy    时间: 2012-12-13 19:51
zfw0080 发表于 2012-12-13 08:44
The first mirrors used by people were most likely pools of dark, still water, or water collected in  ...

那是镜子,不是反光杯。搞清楚了。
即使算是,用了这么久,还长盛不衰,正好说明反射罩很有用处。



作者: phoenixzqy    时间: 2012-12-13 19:52
zfw0080 发表于 2012-12-13 08:44
The first mirrors used by people were most likely pools of dark, still water, or water collected in  ...

采用pmma和pc的成像系统的模具,你那边可以加工吗?
作者: cjx    时间: 2012-12-13 21:04
第一次看到长见识了。问下加工方式是怎么实现?快刀伺服?
作者: phoenixzqy    时间: 2012-12-14 21:27
cjx 发表于 2012-12-13 21:04
第一次看到长见识了。问下加工方式是怎么实现?快刀伺服?

旋压就行。
作者: cjx    时间: 2012-12-19 14:44
母模怎么做出来的?
作者: 一团乱麻先生    时间: 2012-12-20 08:18
phoenixzqy 发表于 2012-3-30 21:41
没有另一个网站有人气啊

哈哈,是没那个人多
但是这里好像能找到的资料多
那边,保守哇
作者: phoenixzqy    时间: 2012-12-24 22:01
一团乱麻先生 发表于 2012-12-20 08:18
哈哈,是没那个人多
但是这里好像能找到的资料多
那边,保守哇

那边资料也不少啊。
作者: phoenixzqy    时间: 2012-12-24 22:02
cjx 发表于 2012-12-19 14:44
母模怎么做出来的?

旋压就行了啊。
作者: cjx    时间: 2012-12-25 21:05
不懂。

作者: phoenixzqy    时间: 2012-12-25 21:21
cjx 发表于 2012-12-25 21:05
不懂。

多交流多学习,会懂的!
作者: phoenixzqy    时间: 2013-4-7 23:00
phoenixzqy 发表于 2012-9-27 22:15
鳞甲反射罩

这个是用scm程序生成的。很便捷。
作者: phoenixzqy    时间: 2013-4-20 18:56
leesirleesir 发表于 2012-3-30 22:30
能详细介绍一下完成的方法吗

可以哦 呵呵  其他帖子里已有介绍了。
作者: phoenixzqy    时间: 2013-4-20 18:57
cjx 发表于 2012-12-25 21:05
不懂。

多曲面反射罩了 设计原理很简单的。




欢迎光临 光电工程师社区 (http://bbs.oecr.com/) Powered by Discuz! X3.2