InfraCal Model CVH 详细规格参数
Instrument Type Fixed Filter Infrared Analyzer, Model CVH
Analytical Wavelength/Wave Number 3.4 μm, 2930 cm-1
Power Requirements 12 Volts DC, 2.0 amps, 12 Volt battery pack or adapter available
Power Supply Universal AC/DC
Weight 4.4 lbs. (2.0 kgs)
Dimensions 6.5 x 6.5 x 5" (165 x 165 x 127 mm)
Suggested Operating Range 5°C - 40°C
Typical Useful Measurement Range:
For Oil in Water 2 - 1000 ppm
For TPH in Soil 200 - 5000 ppm
Analysis Time 10 - 15 minutes, including extraction process
Instrument Repeatability +/-1 ppm
Communication Port RS232 port, 9-pin D-Sub female, PC compatible
Suggested Solvents Perchloroethylene, S-316, AK-225
InfraCal Model CVH 订购配件信息 可选配件说明
Part Number Description
405-0003/12 InfraCal Cuvette Holder Analyzer, Model CVH for oil in water or TPH in soil analysis Complete with CVH Sample Stage for use with 10mm Quartz Cuvette Cells, Power Supply and Instruction Manual. (Includes Set of 4 -- 10 mm Quartz Cuvette Cells).
405-0003/12-40 InfraCal Cuvette Holder Analyzer, Model CVH complete with Factory Calibration using S-316/TOG Calibration Standard Set P/N: 403-1040 for water analysis. Recommended for customers measuring non-polar (petroleum) and polar (animal and vegetable fats) hydrocarbons for FOG or TOG measurements with tetrachloroethylene or S-316 as the extracting solvent. Includes Set of 4 -- 10mm Quartz Cuvette Cells
405-0003/12-41 InfraCal Cuvette Holder Analyzer, Model CVH complete with Factory Calibration using S-316/TOG/TPH Calibration Standard Set P/N: 403-1041 (Please specify if the calibration is for water or soil analysis) Recommended for customers in the petroleum industry that are just measuring petroleum hydrocarbons in water or soil and the now-banned Freon-113 is replaced with the S-316 solvent. Includes Set of 4 -- 10mm Quartz Cuvette Cells
405-0003/12-64 InfraCal Cuvette Holder Analyzer, Model CVH complete with Factory Calibration using Tetrachloroethylene (Perchloroethylene) TOG/TPH Six Point Calibration Standard Set P/N: 403-1064 (Please specify if the calibration is for water or soil analysis) Recommended for customers in the petroleum industry that are just measuring petroleum hydrocarbons in water or soil. Includes Set of 4 -- 10mm Quartz Cuvette Cells
Accessories
403-0012 Set of 4 -- 10mm Quartz Cuvette Cells
403-1067 InfraLog Serial Printer, Model DT2205 Prints Calibration and measurement data, complete sequence number, date and time. Includes all required cables.
403-0013 Carrying Case with pre-diced pluck foam. 18.5 x 14.6 x 8"; 10 lbs.
403-0003 External 12v Battery Pack with 120v/60 Hz charger (for use in North America). Includes carrying case with shoulder strap and cigarette lighter adapter cable for connection to the analyzer. Provides 16 hours of continuous operation.
403-0002 Cigarette Lighter Adapter Cable
403-0005 Dust Cover
Field Sampling Kits
403-1010 Field Sampling Kit for TPH in Soil
For a complete list of kit components, click here
403-1063 Field Sampling Kit for Total Oil and Grease in Water
For a complete list of kit components, click here
Replacement Parts
403-0001 Universal Switching Power Supply and Line Cord for use with InfraCal Analyzers. 90 - 264 VAC, 50 - 60Hz input, regulated 12v/25 watt output.
403-0014 Replacement Source/Cable Assembly
100-2002 InfraCal TOG/TPH User's Manual - Model CVH Also available for download on our website www.wilksir.com at no charge.
All InfraCal Analyzers come with a One Year Factory Warranty against defective parts and workmanship. Additional one and two year extended factory warranties are available. The extended warranty must be purchased at the time the analyzer is purchased.
EWOY Extended Factory Warranty for an additional 12 month period (two year factory warranty from date of shipment)
EWTY Extended Factory Warranty for an additional 24 month period (three year factory warranty from date of shipment)
