光电工程师社区

标题: 反射镜的反射率问题 [打印本页]

作者: liuxingwei    时间: 2007-10-9 09:51
标题: 反射镜的反射率问题


zemax里设置反射镜是在Material里填上Mirror,但它的反射率是100%,怎样才能改变它的反射率?(比如改为80%)
希望高人指导,小弟万分感谢!!!





作者: sophiya    时间: 2007-10-9 10:36


不知道tool -> add coating to all surface行不行呢? 参看手册。





作者: liuxingwei    时间: 2007-10-9 11:39


谢谢sophiya给予指导!
是镀一层模吗?这模的反射率怎么设置?





作者: sophiya    时间: 2007-10-9 14:45


zemax中的镀膜设置应该是根据实际材料、厚度等等的来的,而不是根据反射率来设置。
镀膜设置可查看tool->coating listing,如果有的直接添加好了;没有的,可以自己在tool->edit coating files里面编辑,在重启生效后再添加。





作者: liuxingwei    时间: 2007-10-9 20:25


再次感谢sophiya耐心指导,真的感谢!





作者: liuxingwei    时间: 2007-10-9 21:00
标题: 回复 #4 sophiya 的帖子
Material Name:    Alum     1 date point(s)
Wave length               Index      Extinction
  0.55                           0.82          -5.99

这里的1 date points, index和 extinction 是什么意思?
作者: sophiya    时间: 2007-10-10 10:19
标题: 回复 #6 liuxingwei 的帖子
这里data points是指的有多少个数据,index是指材料的折射率,extinction是指材料的消光系数。
有关消光系数这里有一段说明你可以参考一下:
extinction coefficient
The parameter used to describe the interaction of electromagnetic radiation with matter is the complex index of refraction, ñ, which is a combination of a real part and an imaginary part.
ñ=n-ik
Here, n is also called 'index of refraction' which sometime leads to confusion, and k is called the 'extinction coefficient'. In a dielectric material such as glass, none of the light is absorbed and therefore k = 0.
Before a more detail definition of the extinction coefficient k is considered, let us first look at the absorption coefficient α. In a medium absorbing light, the decrease in intensiry I per unit lenght z is proportional to the value of I. In mathematical form this means:
dI(z)/dz=-αI(z)
where α is the absorption coefficient.
This can be integrated as:
I(z)=Io*exp(-αz)
where I0 is the value of the intensity at the surface of the absorbing medium.
The extinction coefficient k is then defined as:
k=λα/4π
where λ is the vacuum wavelength
作者: sophiya    时间: 2007-10-10 10:25
Zemax 的 coating/material listing主要分三个部分,第一部分是对材料不同波长下的折射率和消光参数的定义,第二部分是对膜层名称的材料和厚度的定义,第三部分是对一些特殊情况下理想膜层反射、折射和吸收率的定义。如:50%折射50%反射的表面,等。
所以我之前说的不是根据反射率来设置也不对。
作者: liuxingwei    时间: 2007-10-10 16:42
再次非常感谢sophiya的细心指导,让小弟学到好多.望以后多多交流!
作者: liuxingwei    时间: 2007-10-10 16:53
Coating Name: PASS_P (IDEAL)
S-Polarization:
   T, tr, ti:     0.00000000     0.00000000     0.00000000
   R, rr, ri:     1.00000000     1.00000000     0.00000000
           A:     0.00000000
P-Polarization:
   T, tr, ti:     1.00000000     1.00000000     0.00000000
   R, rr, ri:     0.00000000     0.00000000     0.00000000
           A:     0.00000000
This coating adds a pi phase shift upon reflection from low to high index.

Coating Name: PASS45 (TABLE)
       Angle:     0.00000000
            : Wavelength         Rs         Rp         Ts         Tp        ARs        ARp        ATs        ATp
            :   0.550000   1.000000   1.000000   0.000000   0.000000
       Angle:    45.00000000
            : Wavelength         Rs         Rp         Ts         Tp        ARs        ARp        ATs        ATp
            :   0.550000   0.000000   0.000000   1.000000   1.000000
       Angle:    90.00000000
            : Wavelength         Rs         Rp         Ts         Tp        ARs        ARp        ATs        ATp
            :   0.550000   1.000000   1.000000   0.000000   0.000000
This coating adds a pi phase shift upon reflection from low to high index.

这里的 T,tr,ti,R,rr,ri,A  和 Rs ,Rp,Ts,Tp,ARs,ARp,ATs,ATp 是些什么意思呢?
作者: sophiya    时间: 2007-10-10 22:07
T应该是指透过率,R是指反射率,r和i分别是指实部和虚部
应该有T=tr*tr+ti*ti,R=rr*rr+ri*ri
A是指的吸收率
其他参数就不清楚了
作者: liuxingwei    时间: 2007-10-11 19:55
谢谢sophiya!
终于明白了一些.
作者: 风铃草    时间: 2007-10-11 20:52
可以把膜系软件中的数据倒入到ZEMAX或者CODE V中来吗?
作者: lytgreat    时间: 2007-10-12 00:11
看了这个文章,觉得学到了很多东西
作者: liuxingwei    时间: 2007-10-14 16:27
大家互相讨论,互相学习啊!!!




欢迎光临 光电工程师社区 (http://bbs.oecr.com/) Powered by Discuz! X3.2