光电工程师社区

标题: zemax的一点问题 [打印本页]

作者: youjiang1987 时间: 2009-3-21 12:07
标题: zemax的一点问题

初学zemax有点问题请教大虾们：

1、一组透镜，它的物方主点，和像方主点在哪里给出呀？
Date : SAT MAR 21 2009

GENERAL LENS DATA:

Surfaces             :             3
Stop                   :             1
System Aperture       : Entrance Pupil Diameter = 25
Glass Catalogs       : SCHOTT
Ray Aiming             : Off
Apodization          : Uniform, factor = 0.00000E+000
Effective Focal Length  :    -34.99617 (in air at system temperature and pressure)
Effective Focal Length  :    -34.99617 (in image space)
Back Focal Length    :       56.62724
Total Track          :       1e+010
Image Space F/#       :       1.399847
Paraxial Working F/# :       1.399847
Working F/#          :       1.159827
Image Space NA       :    0.3363691
Object Space NA       :    1.25e-009
Stop Radius          :          12.5
Paraxial Image Height :             0
Paraxial Magnification  :             0
Entrance Pupil Diameter :             25
Entrance Pupil Position :             0
Exit Pupil Diameter    : 8.749041e-008
Exit Pupil Position    :       56.62724
Field Type             : Angle in degrees
Maximum Field          :             0
Primary Wave          :    0.4861327
Lens Units             : Millimeters
Angular Magnification :             0

Fields       : 1
Field Type: Angle in degrees
#       X-Value       Y-Value       Weight
1    0.000000    0.000000    1.000000

Vignetting Factors
#    VDX    VDY    VCX    VCY    VAN
1  0.000000  0.000000  0.000000  0.000000  0.000000

Wavelengths    : 3
Units: 祄
#       Value       Weight
1    0.486133    1.000000
2    0.587562    1.000000
3    0.656273    1.000000
2、比如说我选了几组透镜组成了个系统，然后我又想查询每组透镜的焦距和参数等，怎么查？

作者: stevenwu 时间: 2009-3-21 12:29

分析－－－节点里面

欢迎光临光电工程师社区 (http://bbs.oecr.com/)