求购

jack88 · 发表于 2008-6-26 14:46:16

求购:如下:请有产品(最好是国产产品)的今天下午给我报价!!人民币(包括增值税)或者美金,邮箱:jack-yao@light-all.com

Photo multiplier tube & power supply Photo multiplier tubes, side-on type, multi-alkali photocathode, window UV glass, with housing and adjustable HV Power supply for PMT 2set
Current Amplifier for PMT output 1

Fast Photo diodes Silicon with quartz window, area 5.1mm2, response time 0.9 µs, (unbiased) 2
Silicon with quartz window, area 50mm2, response time  3.5 µs,  BNC connector 2
Silicon with quartz window, Area 5.1mm2, response time 0.2 ns, (unbiased) 2
Silicon with quartz window, Area 100mm2, response time 2 ns, BNC connector, (unbiased) 2
InGaAS photodiode with sensing area 3mm dia 1
InGaAS photodiode rise time 300ps, sensing area dia 120microns 2
Vernier micrometers for translation stages 25mm travel micrometer for side-driven linear stage 2

Beam Expander & laser mounts for Uniphase cylindrical He-Ne laser Complete beam expander, Expansion power 10X, entrance aperture 2mm, focus range 1.2m to infinity, MgF coated optics and C-thread mount 1
Rear accessory attachment, Power 20X, (to increase the magnification of the expander to 20X) 1
Laser bezel mounting plates, 1inch dia, 4 screw model, fits with Uniphase cylindrical head (1.74”dia) laser, with 4 M3 screws 1
Corner cube prism BK7 glass corner cube prism, 25.4mm internal dia, mounted with mounting holes surface accuracy 1/8 lamda, angle tolerance 3arc sec（http://www.amerinatech.com/Right-Angle-Prisms_cn.asp）
4
Neutral density filter set (visible) Filter set with six 1inch-dia ND filters
Optical densities: 03, 0.5, 1.0, 1.3, 1.5, 2.0, 2.5, 3.0 filter thickness 1.6mm 1 set
Band pass filter kit (broadband color glass) Band pass filter kit with 8 circular band pass filters in a box, filter dia 1inch,
Color glass types: U-330, U-340, BG-12, BG-18, BG-38, VG-6, VG-9 and RT-830 1set
Laser band pass filter set Seven-filter set in a wooden box, 24 mm dia, centers wavelengths , 457.9nm, 488nm, 514nm, 532nm, 632.8nm, 1064nm, half bandwidth<13nm 1 set
Broad band Laser Grade Mirror
d=-25.4mm, 5mm thickness, R>99% in 400-700nm, incidence angle 0-45 deg substrate: Pyrex, laser damage threshold (pulsed, 10ns) 10J/cm2 8
Laser Grade Mirror d=-25.4mm, 5mm thickness, R>99% in 700-900nm, incidence angle 0-45 deg  substrate: Pyrex, laser damage threshold (pulsed, 10ns) 10J/cm2 4
d=-25mm, 5mm thickness R>99% at1064nm, incidence angle 45 deg, substrate: fused silica, laser damage threshold (pulsed, 10ns) 20J/cm2 4
Wave plates/ Polarizers Quartz Zeroth order half wave, d=25.4mm, 532 nm, mounted on anodized cell 1
Quartz Zeroth order half wave, d=25.4mm, 1064 nm, mounted on anodized cell 1
Quartz Zeroth order quarter wave, d=25.4mm, 532nm, mounted on anodized cell 1
Quartz Zeroth order quarter wave, d=25.4mm, 1064nm, mounted on anodized cell 1
Mounted Glan Thompson polarizer, clear aperture 15mm, field angle 15, material: optical grade calcite, extinction ratio: 105 peak transmission: 90% 2
Glass Polarizing Filter, d=42 mm, thickness 10mm, mounted 4
Rotating polarizer holder, inner dia. 42 mm T-threaded to accept 42 mm filters 2
Right angle prisms
UV fused silica right angle prism 25.4 mm sides, surface accuracy 1/2 lamda 2
BK 7 glass prism, 25mm sides, surface accuracy 2 lamda 4
Holographic notch filters (optical density upto 6 at the notch wavelength) 488 nm, notch width 10nm, d=25.4 mm 1
514 nm, notch width 12nm, d=25.4 mm, 1
532 nm notch width 12nm, d=25.4 mm, 2
632 nm notch width 16nm, d=25.4 mm, 1
676 nm notch width 29nm, d=25.4 mm, 1
785 nm notch width 39nm, d=25.4 mm, 1
785 nm notch width 20nm, d=25.4 mm, 1
High power beam splitter Broadband beam splitter 420-700nm, dia 50.8mm, substrate BK7 glass, flatness lamda/10, laser damage threshold (pulsed, 10ns) 5J/cm2, 6
Broadband beam splitter 600-900nm, 50.8mm dia, substrate BK7 glass, flatness lamda/10, laser damage threshold (pulsed, 10ns) 5J/cm2, 2
Non-polarizing 355 nm laser beam splitter, 45 deg incidence, 25mm dia, UV fused silica, 5arcsec parallelism, laser damage threshold 2J/cm2 2
Card Viewers Infrared card viewers size: 86X54mm
IR sensitivity regions: 790-840, 870-1070nm, 1550 nm 2
Lens kit lens kit with twenty-four 25mm dia MgF AR coated lenses in a box, PCX lenses: f=25,50, 75,100, 125,150,175,200,400mm, DCX lenses: at f =25,50,75,100,125,150,175,200, 400 mm, PCV lenses: at f=-25,-50,-100 and DCV lenses: at f=-25,-50,-100 mm 1 set
Prism holder 3inch dia circular plate prim holder with arm to hold prisms and cubic beamsplitters, with mounting hole at the base 3

Fixed Filter mounts Fixed filter mounts to hold rectangular filters with widths between 40-70 mm, supplied with mounting post    4
Fixed filter mounts to hold four stackable circular 1-inch filters with mounting cell accessories 3
Fixed lens mounts Internal D=12.8mm, external dia 31.8mm, thickness 8mm, with threaded mounting ring and mounting holes 2
High performance laser diode driver Laser diver to control both the current and temperature of a laser diode, max current 1.1 amp with current limiting, thermoelectric cooler current 3 amp. With 14-pin butterfly mount, DIL mount and 220V power supply 1
Magnetic Mounting Base Magnetic mounting base with component mounting plate (metric holes), with ON/OFF switch, external dimensions: 66X83X51mm (approx) 10
Lab jack Precision laboratory jack with metric holes, platform dimensions 160X100X12mm (approx), movement range 80-123mm, weight capacity 10kg (approx) 2
Rack-and-pinion stages X-Y-Z axis metric stage with mounting holes, rack-and-pinion movement 60 mm travel with right-angle adapter plates 6
X-Y axis metric stage with mounting holes, rack-and-pinion movement 60 mm travel 6
Iris diaphragms Adjustable mounted iris diaphragms
min aperture 0.8mm, max  25 mm (approx). 6
Optics cleaning Material Optics Cleaning Tissue, Cleaning Chemicals, etc., dust blower (2), tweezers (2) 1 set
Non-linear Crystals Laser grade BBO (Beta-Barium Borate)
Type I (size 4X4X12-15mm, cut angle 21deg)
Type II (size 7X4X15-20mm, cut angle 37deg)
Laser-grade LBO (Lithium Triborate)
(size 5mmX5mmX20mm) approx. Types I and II
1
1

2
Quartz Cells Rectangular cells:
Dimensions (external) 12.5X12.5X48mm (approx), dimensions (internal) 10X10mm with 4 polished sides
Cylindrical cells:
10mm diaX 35-50mm height (approx)
2

2

GROUP F: Optical Table & Breadboard

Items Specification Qty
Optical Table including air-mounted legs Stainless steel honeycomb tabletop (with metric holes) with 4mm thick ferromagnetic stainless steel surface, 1.5X3.6m, 8 inch thick with M6 holes on 25mm grid 1
Air mount isolator, 4 Legs, 28 inch height
With foot-pump pressurization, max load per 4 isolator 3600kg, vertical and horizontal resonant frequencies<2Hz
4 legs
Optical breadboard Optical bread board (metric) with ferromagnetic stainless steel surface, 4ftX6ft, thickness 2inch (approx), with internal damping, with M6 holes on 25mm grid 1ll.com

[ 本帖最后由 jack88 于 2008-6-26 15:17 编辑 ]

sino-laser · 发表于 2008-6-26 16:11:30

我靠, 这是准备什么实验项目啊?
看这些东西, 光准备下来就得半年.....

:-(

harber · 发表于 2008-6-27 11:29:00

成都炬科光学希望与你合作！

hoogoogol · 发表于 2008-6-27 11:37:10

想往国外倒？

真想做联系大恒光电吧

呵呵

hoogoogol · 发表于 2008-6-27 11:39:30

light-all
光傲
这个名字有特点....

求购

很难搞齐

发表回复

浏览过的版块


热搜: 防雾膜棒料红外反射膜光电二极管镀膜机反射膜光谱仪光电探头真空镀银滤光片光器件应用光学 zemax激光远心镜头 sio2 增透膜离子源栅网 zemax 论文高反膜半反半透膜