现在制造黄色激光的关键是如何产生:

2.0k 5
发表于 2004-11-2 01:37:00|山东 | 查看全部 阅读模式
现在制造黄色激光的关键是如何产生:1,342nm 的激光。据有关资料是采用NdYV04泵出来1,342nm 的激光,然后通过KTP倍频。难题就是窄带镀膜!!!!

回复|共 5 个

电阻 楼主Lv.10 发表于 2004-11-2 01:43:00|山东 | 查看全部
这里有一篇文章是国外讲如何产生黄色激光的。黄色激光可是胆固醇分子的吸收波长,对分解胆固醇有很大的意义!!!! ::593.5nm yellow DPSS laser (pointer or larger size), there's a BIG infrared laser diode that generates laser light at 808nm, this is fired into a crystal containing the rare-earth element "neodymium". This crystal takes the 808nm infrared laser light and lases at 1,064 and 1,342nm (yes, deeper in the infrared!). This laser light comes out of the NdYV04 (neodymium yttrium vanadium oxide) crystal and is then shot into a second crystal (containing potassium, titanium, phosphorus, usually called KTP) that roughly doubles the frequency to 593.5nm - the bright orangish yellow color you see. This light is then collimated (focused) by a lens and emerges out the laser's "business end". Just before the lens, there's a filter that removes any stray IR (infrared) rays from the pump diode and the neodymium crystal
netfish Lv.8 发表于 2004-11-2 16:21:00|广东 | 查看全部

是和频,不是倍频

橡树 Lv.12 发表于 2004-11-2 17:26:00|北京 | 查看全部

我觉得现在的光学镀膜应用在激光上的做的还是可以的,

窄带膜的要求是什么,

不会做不了吧?

netfish Lv.8 发表于 2004-11-2 17:44:00|广东 | 查看全部

长春都有了

无聊瓜子 Lv.10 发表于 2004-11-4 02:44:00|福建 | 查看全部
拉曼效应可以出来黄光吗?

回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

投诉/建议联系

admin@discuz.vip

未经授权禁止转载,复制和建立镜像,
如有违反,追究法律责任
  • 关注公众号
  • 添加微信客服
Copyright © 2026 光电工程师社区 版权所有 All Rights Reserved. Powered by Discuz! X5.0 Licensed 鄂ICP备17021725号-1
关灯 在本版发帖
扫一扫添加微信客服
返回顶部
快速回复 返回顶部 返回列表