诚聘Opto-Mechnical Manufacturing Engineer

lvmeng · 发表于 2008-4-18 10:50:34

Job Title: Opto-Mechanical Manufacturing Engineer
Reports To: Product Manager
Location: Wuxi
Responsibility:
1. Perform value-engineering analysis on current processes and designs. Investigate cost-saving measures wherever possible and prepare the necessary ECO's or help facilitate customer ECO’s in support of the company’s OEM sub-assembly business.
2. Develop and document manufacturing process for Opto-mech products, including assembly, alignment and testing. Take from prototype stage into full sales released product stage.
3. Resolve product and process failures, define and implement corrective action plans to eliminate failure modes.
4. Keep abreast of state-of-the-art developments in relevant manufacturing technologies and production equipment. Prepare and champion proposals for improvements and upgrades of manufacturing capability. Specify the application of production equipment. Prepare and implement capital improvement proposals.
5. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.
6. Create routings and conduct process improvements.
Education Required for Position:
1. B.S. or above, majored in Optics / Mechanical.
2. Mechanical or Optical with at least 3 years of hands-on experience with opto-mechanical and electro-optic based products, and alignment and mounting of optical components into sub-assemblies.
3. Experience with CAD/CAM computer programs desired• (Soildworks, Correl Draw)
4. Must be familiar with Opto-Mechnical assembly techniques, interferometric test techniques, metrology, instrumentation, alignment and testing; cleanroom and production environment; WCM, Kanban, Cellular Manufacturing, TQM and JIT concepts.
另：需熟悉透镜、棱镜的冷加工工艺；英语听说读写流利
如有兴趣，请发简历或联系方式至diana.li@casearching.com，也可加MSN：lihaowen-214@hotmail.com，或电话0510-82701836-68（Diana）

koko0514 · 发表于 2008-4-18 14:45:58

More instrution about company please!

lvmeng · 发表于 2008-4-18 15:53:28

公司于2007年12月在无锡新区正式投产运营，主要产品为光学仪器和精密仪器，美国独资公司，同时也是美国上市公司，因为是新公司，所以目前规模不大，但以后的发展会不错：）
公司的风格很open，而且总部对无锡工厂也十分重视。

sunnyhk · 发表于 2008-4-20 11:58:05

都到第二页了帮你顶上去

lvmeng · 发表于 2008-4-21 15:17:39

谢谢！说明这里的人气很旺嘛

lvmeng · 发表于 2008-4-24 14:07:54

周五外出，请邮件联系！
谢谢:) :)

lvmeng · 发表于 2008-4-25 14:12:23

新职位（同一公司）：
Position: Technician

Requirement

1.    College,  Mayor in Opto. Or related.

2.    Good English skill

3.    have 1-2years experiences on opto. Assembly and hand on alightment.

4.    familiar with measure equipments, Such like 干涉仪，　双折射测试仪，　& laser

5.    Have experience working in cleaning room.

GMP · 发表于 2008-4-25 15:22:46

请问你们的公司还需要玻璃模造技术员吗？谢谢

hasayakilu · 发表于 2008-4-28 12:35:23

能要一下你的QQ么~互相交流一下

lvmeng · 发表于 2008-4-28 13:05:11

目前没有这类的职位，如果有，我在论坛上联系你！

lvmeng · 发表于 2008-4-28 13:06:21

是同行吗：）
我的QQ：156112555

lvmeng · 发表于 2008-5-9 09:43:32

自己顶一下，看看有没有合适的人

诚聘Opto-Mechnical Manufacturing Engineer

回复 #4 sunnyhk 的帖子

回复 #7 lvmeng 的帖子

回复 #8 GMP 的帖子

发表回复

浏览过的版块


热搜: 防雾膜棒料红外反射膜光电二极管镀膜机反射膜光谱仪光电探头真空镀银滤光片光器件应用光学 zemax激光远心镜头 sio2 增透膜离子源栅网 zemax 论文高反膜半反半透膜