一种长工作距视频显微镜光学系统设计

soft · 发表于 2015-7-10 17:14:20

一种长工作距视频显微镜光学系统设计
The optical system design of long working distance video microscope
下载全文

一种长工作距视频显微镜光学系统设计.pdf (240.08 KB, 下载次数: 0)
作　　者：高健向阳尹志东周丹
GAO Jian, XIANG Yang , YIN Zhidong , ZHOUDan （School of Opto-Electronie Engineering, Changehun University of Science and Technology, Changchun 130022, China）
机构地区：长春理工大学光电工程学院,吉林长春130022
出　　处：《光学仪器》 2014年第5期 416-419页,共4页
Optical Instruments
摘　　要：视频显微镜随着CCD探测器的发展得到了广泛应用.但其工作距离受以往折射式光学系统的限制,工作距离较短,影响了其应用范围.分析了长工作距视频显微镜的像差特点,并结合其长工作距离,利用光学设计软件Zemax进行光学成像效果的仿真,给出了工作距84.5 mm,数值孔径0.16,光学放大倍率5倍,物方线视场1.2 mm,分辨率7.7μm的折反射式显微镜光学系统的设计结果.
The video microscope has been widely used in many applications with the development of CCD detector. The working distance of the video microscope is short due to the limitation of the catadioptric configuration and it affects its application. In this paper, we focus on the analysis of aberration characteristics which is influenced by the long working distance. At last, we use optical design software Zemax to simulate the optical effectiveness and give design results of cassegrain system where the working distance is 84. 5 mm, the numerical aperture is 0. 16, the optical magnification is 5, the field number is 1.2 mm and the resolution is 7. 7 μm.
关键词：视频显微镜长工作距光学设计折反射式
video microscope ; long working distance ; optical design ; catadioptric configuration ;

[技术] 一种长工作距视频显微镜光学系统设计

本帖被以下淘专辑推荐:

相关帖子

发表回复

浏览过的版块


热搜: 防雾膜棒料红外反射膜光电二极管镀膜机反射膜光谱仪光电探头真空镀银滤光片光器件应用光学 zemax激光远心镜头 sio2 增透膜离子源栅网 zemax 论文高反膜半反半透膜