帮忙翻译:1/4波片

2.0k 0
发表于 2005-7-27 00:29:00|福建 | 查看全部 阅读模式
1. This document constitutes a specification for a first order, two component,quarter wave retardation plate. The assembly consists of two nominally plane parallel plates of crystal quartz whose axes are nominally at an angles of 90 to one other and nominally parallel to the entrance face of one of the componets. The assembly will be air spaced with pn 632-5 or equivalent and edge cemented. 2. Deviation of a transmitted beam of 632.8nm light normal to polished surface. Filling the clear aperture , shall not exceed 30 second arc. 3. Optical material for component elements is crystalline quartz that satisfied striae grade a specification per 632-4. 4.Polarization characteristics as defined in 632-1 paragraph 2. Leakage shall not exceed 0.3%. Retardance shall satisfy the condition 0.25

回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

投诉/建议联系

admin@discuz.vip

未经授权禁止转载,复制和建立镜像,
如有违反,追究法律责任
  • 关注公众号
  • 添加微信客服
Copyright © 2026 光电工程师社区 版权所有 All Rights Reserved. Powered by Discuz! X5.0 Licensed 鄂ICP备17021725号-1
关灯 在本版发帖
扫一扫添加微信客服
返回顶部
快速回复 返回顶部 返回列表