Modeling Laser Cavities using ZEMAX and LASCAD

This article describes work undertaken at the University of Bern to model the cavity of a side-pumped crystal laser. The radiation transferred from the pumping diode array to the laser rod was modeled using the non-sequential mode of ZEMAX. The absorbed flux was then transferred to the LASCAD program where it was transformed into a volumetric gain profile, and the subsequent laser modes were predicted. Excellent agreement between predicted and experimentally obtained results was achieved.

谢谢了，顶下！

不知道咋样，下了再说。。。。。

看看再说，可以在光学设计zemax部分贴铁

正好需要方面的资料，谢谢

为什么下不来哦

哎呀！要金钱呀！晕

楼主 下不来
可以给我发一份吗？
becomefree@sina.com  谢谢

我就比较想要LASCAD的教程

下来看看  谢谢！！！！！！！！！！！！！！！！！

好东西！！！！！！！！！！！！！！！！！！谢谢

many thanks to hp4106.................................